HERION

HERION Special Press Technology
HERION Combined Hydraulic Clutch / Brake

HERION all hydraulically operated clutch/brake provides untouchable high performance.

The Friction plates are all running in wet condition so that virtually wear free is achieved.

Featuring:

 ● Reduction of spare parts and maintenance costs by virtually wearfreeness
 ● High permissible running frequency in single step mode to get higher productivity
 ● Short braking time
 ● Constant braking angle, safe and reliable
 ● Higher working pressure
 ● Small installation space is required by its compact design
 ● Low intrinsic moment of inertia, saving of energy costs
 ● Low noise level
 ● Clean system (no dust pollution or air pollution)
 ● Increasing of fly wheel speed and reducing of physical volume

HERION Clutch/Brake Type Selection Table

HERION Clutch/Brake Technical Questionnaire

Press Description
Press Type	□ Multi tie rod	□ Crankshaft connnection rod
Clutch/Brake Type	□ Integrated	□ Separate
Press Technical Specification
Maximum pressure (kN)	F =
Clutch torque (Nm)	TC =
Crankshaft rotation diameter (mm)	H =
Rod length (mm)	L=
Working angle before reaching bottom dead center (degree) or nominal force stroke (mm)	α= h =
Minimum crankshaft speed (rpm)	Min.nEX=
Maximum crankshaft speed (rpm)	Max.nEX=
Minimum clutch/brake speed (rpm)	Min.nCBC=
Maximum clutch/brake speed (rpm)	Max.nCBC=
All the rotation inertia transferred to axis of clutch/brake which is required to be conquered during braking, not including the rotation inertia of clutch/brake and fly wheel               (kgm2)		I =
The connection frequency per minute in single mode at maximum speed (times/minute)		Z =
Description of press operation mode